If you are new to this tool, we recommend you start from the selected list of tutorials listed in this particular category. The tutorials in this category have been carefully selected to assist the new user to familiarize the tool in a step by step approach.
Performing the history matching for a gas reservoir – MBAL
This introductory tutorial will guide the user how to perform a history match for a gas reservoir and obtain useful information such as the GIIP, drive mechanism, etc.
Performing the history matching for a gas and condensate reservoir – MBAL
The history matching of a gas and condensate field is performed in this tutorial. In this case, production information is available on a well-by-well basis. OGIP and acquifer parameters are obtained.
Performing the history matching and predictions for an oil reservoir – MBAL
In this tutorial, an oil reservoir is analyzed. The pressure trend is history matched and OOIP is obtained. Then, production forecast is set using well models to evaluate production rates; estimating recovery factor and future Reservoir Pressures.
Performing the predictions for an oil reservoir – MBAL
This tutorial focuses on MBAL's prediction forecast module. Using this calculation tool, future production rates are evaluated, as well as recovery factors and estimated reservoir pressures. Different development scenarios are evaluated.
Using MBAL's prediction capabilities, a forecast is calculated for a gas field with 4 wells. The model is used to obtain abandonment P/z values, evaluate proved developed reserves, and estimate the future gas production profile.
This introductory tutorial guides the user through the creation and matching of a Tight Gas well model. Well production data is input to the model and then the reservoir parameters (GIIP, permeability and drainage area) are matched.
Constructing and matching a material balance model for an oil field – MBAL
In this tutorial a review of the material balance history matching for an oil system is reviewed. This tutorial will guide the user through the different steps to calibrate and history match a material balance model.
This tutorial described how to perform production forecast for several scenarios for an oil reservoir. The final objective is to increase the final oil recovery factor of the field through the implementation of different ideas.
12m 02s •
Version: IPM 11 •
Code: M01
• Required Tools: MBAL