If you are new to this tool, we recommend you start from the selected list of tutorials listed in this particular category. The tutorials in this category have been carefully selected to assist the new user to familiarize the tool in a step by step approach.

These tutorials will show you how to perform some specific tasks in a straight forward approach, saving you time when you need support on the tool.

The idea behind these tutorials is that you jump directly to the topic needed that answers your question.

Under this category you can find tutorials that will show you how to model and evaluate the performance of water injector, gas injector, polymer injector wells, etc.

A wide range of lessons relate to naturally flowing oil wells. You will find different ways to model the IPR, calibrate/match the well model, evaluate the performance and perform sensitivity analysis.

Different tutorials relate to gas and retrograde condensate wells. You will find different ways to model the IPR, calibrate/match well models, evaluate the performance and perform sensitivity analysis.

If your focus is on modeling artificially lifted wells, you will find a several lessons for different types of artificial lift systems (e.g. ESP, Gas lift, PCP, Sucker rod pump, etc.). You can find topics on how to design, match existing installations; evaluate the performance of the system.

Different reservoir models are discuss in the tutorials such as multi-layer well models, horizontal wells, multi-lateral wells and different IPR models (e.g. Darcy, Jones, Vogel, etc.).

The tutorials for this topic focus on flow assurance issues, temperature modeling, hydrate formation, wax deposition. Flow-lines parameters such as flow regimes, slug size and frequency related tutorials.

PROSPER offers different methods to model fluid behavior. In the following tutorials you will find different methods and techniques that can be used in PROSPER (e.g. black oil correlations, EOS, emulsions, non-Newtonian fluids, etc).

The tutorials in this section address the calibration/matching procedure for different types of wells (gas, oil, retrograde condensate). Best practices and workflows are illustrated in the following tutorials.

Tutorials within this category show how to perform sensitivity analysis to different variables.